Each tier of tanks will have
(1) Day / Night or Heat Bulb Fixture with (2) cleats for each tank.
(1) LED Light Fixture
Day / Night or Heat Bulb Fixtures: (Bulbs not included)
All instructions are while facing the front of the REPTILE RACK.
Each individual tank on each tier will have (2) light bulb options. Position the Day/Night or Heat bulb fixtures so that each tier of tanks has the correct fixture above it. For a tier divided into (6) tanks it will have (12) light cleats, for (4) tanks, it will have (8) light cleats, (2) tanks will have (4) light cleats etc. These light fixtures are positioned towards the back of the reptile rack. Plug-in part of the cords to the (L) left. Plug in cords pass through (L) left side hole on the back of the rack.
Each Day / Night or Heat Bulb Fixture has a (R) right and a (L) left plug-in. This will power the (R) right side bulbs and the (L) left side bulbs independently above each tank so that one can be on during the day and the other on at night and or for heat as needed.
With the Day/Night or Heat Bulb Fixtures in place, the power plug closest to you powers all of the (R) right bulbs, the power cord closest to the back of the rack will power all of the (L) left bulbs. Plug the (R) right cords into the multi power outlet on top on the rack on the (R) right and the (L) left cords on the left.
You will have the (3) LED fixtures plugged into the (L) left power strip on the top of the rack plus the (3) (L) left bulb plugs to power all of the left side bulbs, (6) total plugs, you will have (3) total plugs plugged into the (R) right power strip which are for all of the (R) right side bulbs each tank.
LED Light Fixture
All instructions are while facing the front of the REPTILE RACK.
The LED Light Fixtures are positioned towards the front of each tier of tanks with the plugs on the (L) left side of the rack. Cords pass through (L) left side hole on the back of the rack. Plug the LED Light fixtures into the (L) left multi power outlet on top of the rack.
Add or remove day / night or heat bulbs: (MAX wattage 40W)
To add or remove the bulbs - Push down on lever to remove the screen, screw in bulbs, replace screen.
BACK ACCESS:
If you need to remove the light fixtures at anytime from the back, please follow these instructions:
With the levels stacked in place, pull the top layer towards you 4”, push the middle tank away from you 4”, to create a gap on the bottom level, this is where you can either position or access the light fixtures.
To access the middle tank, push the top tank away from you 4”, this will create a cap on the middle level to remove the light fixture through. You can access the top light fixture from the top of the rack.